Why is my surface pen eraser not working

When you’re trying to erase something on your Surface Pen, it just doesn’t seem to be working right. Maybe the pen is making clicking noises and the eraser just isn’t doing its job. Here are a few tips that might help:

– Make sure that the pen is fully charged.
– Try different angles – maybe the eraser needs to be at a higher or lower angle in order to work properly.
– Try using a different type of paper – some types of paper might work better with the Surface Pen’s eraser than others.

How do I get my Surface Pen eraser to work?

If your Surface Pen eraser is not working, there are a few possible causes. Here are a few tips to troubleshoot and solve the issue:

1. Check the battery

If the pen’s battery is depleted, the eraser might not work. To check the battery, open the cover on the pen and press and hold down the “pen button” until the light starts blinking. Release the button when you see the green light. The pen should have a replaceable battery (3rd Gen or later). If you have an older pen, you can replace the battery yourself. See our guide for more information.

2. Make sure you’re using compatible pens

Some pens are not compatible with erasers, so make sure to use a pen that is designed specifically for drawing and writing on surfaces. Not all erasers work with all pens.

3. Try cleaning the eraser tip

If you’ve tried replacing the battery and it still doesn’t work, you might need to clean the eraser tip. To do this, remove the eraser tip from the pen by unscrewing it. Rinse it off in water and dry it off before putting it back in to your

Why is my surface pen tip not working?

If the tip of your Surface Pen isn’t working, there are a few things you can check. First, make sure that the pen is charged. Second, make sure that the pen is properly installed in the Surface Pen Port. Third, make sure that the nib is aligned with the ink cartridge. Lastly, make sure that the cap is on tight and not loose.

Does the Surface Pen have an eraser?

If your Surface Pen doesn’t have an eraser, there may be several reasons.

First, make sure the pen is charged and inserted correctly into the Surface Pen Dock. If the pen isn’t charging or isn’t inserted correctly, it may not work.

Second, make sure that the eraser is actually attached to the pen. Sometimes t he eraser may become detached from the pen over time and will need to be replaced.

Third, make sure that there is no debris or dirt blocking the pen’s air flow. If debris builds up on the tip of the pen, it can cause it not to work.

How do I calibrate my Surface Pen?

When you first got your Surface Pen, you likely noticed that the eraser wasn’t working. If you’ve tried different tips and the eraser still isn’t working, it may be time to calibrate your pen.

To calibrate your pen, open the “Calibration” app on your device and follow these steps:

1. Draw a straight line on the screen using the tip of the pen. The line should be about 1.5 inches (3 cm) long and 0.25 inch (6 mm) wide.

2. Hold the pen near the top of the line and press down on the pen tip to erase part of the line. The end of the line where you erased should be darker than the rest of the line.

3. Repeat steps 1 and 2 several times to get a good calibration of your pen’s eraser.

How do you fix a stylus tip?

Surface pen erasers are a handy tool to keep around, but if yours isn’t working properly, there are a few things you can do to fix it. First, try blowing into the tip of the eraser to clear any debris. If that doesn’t work, take the pen apart and clean out any dirt or gunk that may be blocking the stylus tip. Finally, try a different eraser if all else fails.

What does the side button on Surface Pen do?

The side button on the Surface Pen is used to toggle between drawing and erasing. When it is held down, the button becomes a button to erase.

How long do AAAA batteries last?

pen erasers work by using a small magnet to pull the metal ball out of the ink cartridge, once the ball is out it can no longer grip onto the plastic and the pen will not write. If your pen eraser is not working, then it may be because the magnet is not strong enough to remove the ball from the cartridge.

Does Surface Pen come with replacement tips?

If you have a Surface Pen, be sure to check the product warranty for tips! Some tips come with the pen, but others may need to be purchased separately.

Why is my stylus pen skipping?

There are a few different reasons why your stylus pen may be skipping. Here are a few of the most common:

1. The cap is not on properly
Make sure that the cap is on tightly before using the pen. If it’s loose, the pen may not work as well because dust and other objects can get into the ballpoint mechanism.
2. The ink cartridge is empty or damaged
If your pen is skipping and the ink cartridge is freshly installed, it may be that the cartridge is empty or damaged. To test if this is the case, remove the cartridge and shake it well. If the liquid remains, then the cartridge is fine; if there’s no liquid, then it needs to be replaced.
3. The nib may be dirty
If your stylus pen is skipping often, it may be because the nib (the writing tip) is dirty. To clean it, remove all of the writing ink with a paper towel, then use a mild soap and water to rinse off the soap. Finally, dry the nib with a paper towel.


Eraser-less pen technology is quickly becoming a popular choice for consumers and businesses alike. However, there are a few common issues with eraserless pens that need to be addressed. In this blog post, we’ll discuss why some surface pens may not work as expected, and suggest remedies for each.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *