How to clean roborock sensors

If you’re like most people, you probably think of Roborock as a great tool for data collection and analysis. But did you know that you can use Roborock to clean your sensors? In this article, we’ll show you how to clean your Roborock sensors using the Roborock Cleaner app, and discuss some of the benefits of doing so.

How do I clean my Roborock sensor?

Roborock sensors are designed to be easily cleaned. Here are the steps:

1. Wet the sensor down with water. Make sure to get all of the dirt and dust off.

2. Use a cloth or an absorbent paper to dry the sensor completely. Do not use a hair dryer or any other type of heat as this could damage the sensor.

3. If necessary, use a little bit of cleaning agent to clean any dirt or dust that may have built up on the sensor over time.

How do you clean the sensors on a robot vacuum?

One common chore associated with owning a robot vacuum is keeping the sensors clean. These tiny devices monitor your environment and adjust the vacuum’s suction to ensure your floors remain clean.

The sensors can become dusty and dirty over time, making it difficult for the vacuum to operate effectively. To clean the sensors, first remove any debris that may be blocking the sensor’s light path. Then, use a lint-free cloth to wipe down the sensor. Finally, dry the sensor off before re-installing it into the vacuum.

Where are the sensors on Roborock S5?

If you’ve ever used a Roomba robot vacuum cleaner, you’ve probably noticed the little sensors on the floor. These sensors help the robot navigate around furniture and other obstacles.

These sensors are known as roborock sensors, and they play an important role in the operation of the robot vacuum cleaner. They need to be cleaned regularly to keep them working optimally.

Here’s how you can clean your roborock sensors:

1. Unplug your robot vacuum cleaner if it’s currently plugged in.
2. Remove the screws that hold the floor cover in place.
3. Remove the floor cover and clean all of the roborock sensors with a soft cloth or a vacuum cleaner. Make sure to remove any dirt, dust, or debris that may have accumulated on them over time.
4. Replace the floor cover and screws, and plug your robot vacuum cleaner back in to power up.

Can you put vinegar in Roborock?

If you want to clean your Roborock sensors, you can use white vinegar. You should mix 1 cup of white vinegar with 3 cups of water. Pour the mixture into a spray bottle and use it to clean your sensors.

How do I clean the sensors on my Roborock s4 Max?

If you have a Roborock s Max robot vacuum, you may notice that the sensors on the robot are dirty. These sensors help the robot to map your house and determine where to clean.

To clean the sensors on your Roborock s Max, follow these steps:

1. Remove the cover of the sensor.
2. Remove any dust or dirt that is on the sensor.
3. Rinse the sensor with water and dry it off.
4. Replace the cover and screw it down tight.

How often should I clean Roborock?

There is no set time or frequency that you need to clean your Roborock sensors, as this will depend on the type of use and environment that they are in. However, it is generally recommended to clean them at least once a week. To do this, simply remove the cover and wash the sensor with warm water and a mild cleaning solution. Make sure to dry it off afterwards.

Why does my Roborock smell?

If your Roborock is smelling bad, there are a few things you can do to clean it and fix the issue. First, make sure that all of the sensors are fully charged. Second, make sure that the dock is clean and free of debris. Finally, give the Roborock a good scrub with a soft cloth or sponge.

Can you wash the filter on a Roborock?

Yes, you can clean the filter on a Roborock. To do so, first remove the filter by unscrewing it from the bottom of the robot. then wash it in warm water and detergent using your usual cleaning routine. Once the filter is clean, screw it back on to the robot and you’re ready to go!


If you own a roborock robot or another type of sensor-laden machine, it’s important to know how to clean them properly in order to keep them functioning optimally. Follow these simple steps for cleaning your roborock sensors:

1. Turn off the robot and unplug it from the power source.
2. Remove any screws that may be holding the sensors in place, and then gently pull them out of their mounts. Be careful not to damage the sensors themselves in the process!
3. Rinse each sensor under running water until all traces of dirt and dust have been removed. Make sure to use a gentle soap if necessary, as some harsh chemicals can damage the surface of the sensors over time.
4. Dry each sensor completely before re-installing it into its mountings.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *