How to clean juul

In this article we are going to show you how to clean your Juul. If you have just bought a Juul, then you probably have no idea how to clean it. In this article, we will show you the best way to clean your Juul and make sure that it stays in good condition.

How do you clean the inside of a Juul device?

Cleaning the inside of a Juul device can be difficult, but there are several ways to go about it. Here are four recommended methods:

1. Use a vacuum cleaner with a crevice tool. This will help remove any particles that have lodged inside the device.

2. Use boiling water and a brush. Boil water and pour it into the Juul device until it’s half full. Swish the brush around in the boiling water to clean the device.

3. Pour white vinegar into a bowl and add some salt. Put the Juul device in the vinegar and salt mixture and shake it around for a few minutes to clean it.

4. Use rubbing alcohol and a cotton ball to clean the device. Wet the cotton ball and place it over one end of the Juul device. Aim the other end of the cotton ball at a lightbulb, hold it there for 30 seconds, and then remove it. The lightbulb should be completely clean after this process.

Can you clean a Juul with alcohol?

Yes, you can clean a Juul with alcohol. To do this, first make sure the Juul is completely dry. Next, pour a small amount of alcohol onto a cloth and clean the Juul. Finally, dry the Juul with the cloth.

How do you clean a clogged Juul?

If your Juul is clogged, there are a few things you can do to try and clear the device.

1. Remove the battery and discharge the device.

2. Use a q-tip to clean around the air intake and around the battery.

3. Use a toothbrush to remove any build-up around the coil.

4. Pour household vinegar down the coil and hold for 10 seconds before cleaning with an antibacterial soap solution.

Can u wash a Juul pod?

Yes, you can clean a Juul pod by following these simple steps:
1. Remove the battery and charger from your Juul pod.
2. Fill a basin with water and place the Juul pod in the basin.
3. Swish the water around the pod until it is clean.
4. Rinse the pod with cold water to stop the cleaning process.
5. Place the battery and charger back into the Juul pod and enjoy your clean device!

How do you get a JUUL pod unburnt?

The easiest way to avoid an unburnt JUUL pod is to clean it immediately after use. To do this, remove the pod from the device and hold it with the foil facing down. Press and hold the battery cover for about 10 seconds until the pod pops open. Remove the pod and empty the contents into a bowl. Pour enough hot water over the contents of the bowl to cover the pod and let it soak for about 15 minutes. After soaking, use a toothbrush to scrub away any residue. Empty the water and dry the pod off.

Can you clean JUUL with hydrogen peroxide?

Yes, you can clean your JUUL with hydrogen peroxide. Follow these steps:
1. Fill a small bowl with hydrogen peroxide and set it next to the Juul.
2. Hold the Juul upside down and pour the hydrogen peroxide over the coils.
3. Carefully scrub the coil with a toothbrush until it is clean.
4. Rinse the Juul with water and let it dry.

What happens if I put water in my Juul pod?

If you put water in your Juul pod, it will not work. The pod needs to have a charging wire attached in order for it to work.

How do you clean and reuse Juul pods?

If you have used your Juul pod for less than two weeks, you can clean it by using a mild soap and warm water. If the pod has been used for more than two weeks, you will need to replace it.

Can you vape water?

There is no denying that the Juul vape device is one of the most popular devices on the market. But with its popularity comes the risk of it becoming dirty and clogged up. With so many people using Juuls, it can be difficult to keep them clean and free from bacteria. Here are a few tips on how to clean a Juul:

1. First, make sure to remove all of the existing juices and cartridges from your Juul device. This will help to reduce the amount of waste that needs to be cleaned later on.

2. Next, use a gentle cleaning solution to wet down your Juul device and then use a soft cloth or q-tip to clean all of the surfaces. Make sure to get into the small nooks and crannies!

3. Finally, dry off your Juul device thoroughly before replacing any parts or putting it back into use.


The Juul is a great device for smokers looking to switch to vaping, but it can be difficult to keep clean. Here are some tips for cleaning your Juul:

– Remove the battery and charger.

– Wipe down the device with a damp cloth.

– If there is nicotine residue, use a nicotine wipe to remove it.

– If there is wax or resin residue, use a soft cloth and alcohol to clean it.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *