how do i reset the filter light on my soclean

If your filter light on your Soclean starts blinking, it means the machine needs to be reset. To do this, turn off the power to the machine by unplugging it from the wall and then flipping the switch on the front of the machine to the off position. Next, pull out (or remove) the filter cover and locate the reset button. Push down on this button until it clicks into place and then turn back on power to your Soclean.

How do you reset a SoClean 3?

If you are experiencing trouble with your SoClean and the filter light is staying on, there is a simple solution. You can reset the filter by following these steps:

1. Open the SoClean and remove the filter.
2. Place the filter in a clean container.
3. Rinse the filter with tap water and let it air-dry.
4. Replace the filter in the SoClean and close the lid.
5. Press and hold down the reset button for 10 seconds until it begins to flash blue

Why does my SoClean flash red yellow and green?

If your filter light flashes red yellow and green, it means that the filter is not clean. To reset the filter light, follow these steps:

1. Unplug the SoClean from the wall.
2. Remove the filter by gently pulling it away from the unit.
3. Clean the filter with a cloth or a toothbrush lightly moistened with water.
4. Replace the filter and plug in the SoClean to power on. The filter light should now be green.

Why is my SoClean light yellow?

If you have a SoClean, there’s a chance the filter light is yellow. This indicates that the filter needs to be replaced. You can reset the filter light by following these steps: 1. Unplug the SoClean and wait 10 seconds. 2. Plug in the SoClean and wait 5 seconds. 3. Press and hold the power button for 3 seconds. 4. Release the power button and wait 10 seconds. 5. The filter light should turn green, indicating that the filter has been replaced.

How do you reset the time on a SoClean machine?

If you find that the machine is not cleaning as well as it should be, there may be a problem with the time. Resetting the time on your SoClean machine can help resolve the issue.

To reset the time, follow these steps:

1. Open the front panel of your SoClean machine by pressing the release button on top.

2. Locate and remove the battery cover.

3. Reset the time by turning the clockwise knob until it stops (1 hour = 30 turns).

4. Replace the battery cover and press the release button to close the front panel.

Can I put my phone in my SoClean?

If your filter light is on, the first thing you should do is try resetting your filter. To do this, press and hold the power button and home button at the same time until you see the Samsung logo appear. Then release both buttons. After a few seconds, your phone will restart and the filter light should turn off. If it does not turn off, please call our customer service team at 1-800-SAMSUNG (1-800-726-7864).

How do you know if your SoClean is working?

If you have a SoClean, check the filter light to see if it is flashing. If it is not flashing, your filter needs to be replaced.

How often should SoClean filters be changed?

The SoClean filters should be replaced every 6 months.

Can I run SoClean with water in humidifier?

If you are using the SoClean to clean your air, can you also run it with water in the humidifier? Water is a natural and effective way to humidify the air.


If you’re having trouble getting your soclean to work like it used to, there might be a simple solution. To reset the filter light on your machine, turn it off and wait five minutes before turning it back on. This should clear any debris that’s clogging up the filtration system. If this doesn’t help, you can also try blowing out the filters with compressed air and using a new filter cartridge when needed.

You may also like...

Leave a Reply

Your email address will not be published. Required fields are marked *